No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
SmartACU2000D Smart Array Controller User Manual (With PID Modules)
This document describes the SmartACU2000D smart array control cabinet (with PID Modules), that is, the smart array control unit in terms of installation, cable connections, commissioning, and maintenance.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Routine Maintenance
Routine Maintenance
Wear personal protective equipment and use dedicated insulated tools to avoid electric shocks or short circuits.
If you need to open the cabinet door on rainy or snowy days, take protective measures to prevent rain or snow from entering the cabinet. If it is impossible to take protective measures, do not open the cabinet door on rainy or snowy days.
Prior to maintenance, power off the equipment.
Table 7-1 Maintenance checklist
Check Item
Check That
Maintenance Interval
Cabinet
The SACU exterior is not damaged or deformed.
There is no dust or dirt in the SACU.
Once every twelve months
System running status
All devices in the SACU operate properly.
The SPD works properly.
Once every six months
Electrical connections
Cables are secured.
Cables are intact and especially the parts touching the metallic surface are not scratched.
Idle waterproof connectors are plugged and the locking caps are tightened.