Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting the Single-Phase Power Cable
- Prepare a cable.Figure 5-24 Length for cable stripping
- Connect the cable to the single-phase input switch.
Connect the L and N (L) wires to the L and N (L) terminals of the station-service power source for the transformer station through an MCB.
- Bind the cable.Figure 5-25 Connecting a cable
