Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Connecting the Peripheral Network Cable
Connect peripheral network cables to ports FE2 to FE5 on the switch. All network cables can be connected in the same way.
- Prepare a network cable.Figure 5-20 Wiring sequence of an RJ45 connector
(1) White-and-orange
(2) Orange
(3) White-and-green
(4) Blue
(5) White-and-blue
(6) Green
(7) White-and-brown
(8) Brown
Verify that the network cable functions properly using a network cable tester.
- Connect the peripheral network cable to the FE2 port on the switch.
- Bind the network cable.Figure 5-21 Connecting a network cable
