Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing the Ethernet Switch
- Remove the panel behind which an Ethernet switch will be installed.
- Secure the Ethernet switch.
- Connect a PE cable to the Ethernet switch.Figure 4-10 Installing an Ethernet switch
- Connect the FE1 port on the Ethernet switch to the WAN port on the SmartLogger using the network cable delivered with the Ethernet switch.
- Connect the preinstalled power cable to the power port on the Ethernet switch based on the label.Figure 4-11 Connecting cables to an Ethernet switch
