Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Component Replacement
- Do not perform operations with power on because high voltage exists during the running of the device.
- Before replacing a component, ensure that a spare component of the same model is available and functional.
- Before replacing a component, power off the SACU. Wait at least 3 minutes after the power-off to ensure that the SACU is de-energized.
- After replacing a component, check the SACU before powering it on to ensure that the new component works properly.
- Dispose of faulty components in accordance with the local disposal act for waste electrical equipment.
- Replacing the Single/Three-Phase SPD
- Replacing the Knife Fuse Switch
- Replacing the Fuse of a Knife Fuse Switch
- Replacing the Single-Phase Input Switch
- Replacing the SmartMBUS CCO Module
- Replacing the SmartLogger
- Replacing the SmartModule
- Replacing the Power Adapter
- Replacing the PID Module
- Replacing the PID Module Switch
- Replacing the Fiber Adapter
- Replacing the USB Port