Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the Chassis Cover
This section describes how to remove the chassis cover from the SVP before replacing any SVP part in the chassis.
Impact on the System
An SVP must be powered off before the replacement. As a result, services and programs running on the SVP will be interrupted.
Prerequisites
- You have powered off the SVP before removing its chassis cover.
- You have removed the SVP before removing its chassis cover. For details, see Removing the SVP.
- You have obtained the rack number and chassis number of the SVP.
- You have located the SVP based on the preceding information, and labeled its panel to prevent misoperations.
Tools and Materials
- ESD gloves or ESD wrist strap
- Flat-head screwdriver
Procedure
- Loosen the latch that secures the handle of the chassis cover using a flat-head screwdriver. See step (1) in Figure 5-73.
- Open the handle to push the chassis cover backwards. See step (2) in Figure 5-73.
- Lift the chassis cover. See step (3) in Figure 5-73.
