About This Document
Introduction
This document describes how to replace parts of OceanStor 18000 V3 series and provides instructions on safety operations, preparations, and precautions.
The following table lists the product models applicable to this document.
Product Series |
Product Model |
|---|---|
OceanStor 18000 V3 series |
OceanStor 18500 V3 and 18800 V3 |
Intended Audience
This document is intended for all audience.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
|---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.
Issue 15 (2020-09-15)
This is the fifteenth release.
Optimized some description.
Issue 14 (2019-09-30)
This is the fourteenth release.
Modified the document name and applicable product models.
Updated the method to log in to SmartKit.
Added the chapter "Downloading and Installing the Latest FRU Tool".
Issue 13 (2019-08-20)
This is the thirteenth release.
Added supported quorum server models.
Updated CRUs and FRUs.
Issue 12 (2019-06-30)
This is the twelfth release.
Added the section "How to Access Parts Replacement Multimedia".
Optimized some description.
Issue 11 (2019-05-15)
This is the eleventh release.
Optimized some description.
Issue 10 (2019-03-30)
This is the tenth release.
Optimized some description.
Issue 09 (2019-01-25)
This issue is the ninth official release.
Added the method of replacing a coin battery in the section Replacing a Controller.
Updated the parts of a quorum server that can be replaced and the procedure for replacing those parts.
Issue 08 (2018-12-06)
This issue is the eighth official release.
Optimized the document structure based on the replacement methods of CRUs and FRUs.
Updated operations related to SmartKit.
Issue 07 (2018-07-30)
This is the seventh release.
Optimized some description.
Issue 06 (2018-05-09)
This issue is the sixth official release.
Updated SmartKit operations in Using SmartKit for Parts Replacement (Recommended).
Issue 05 (2018-01-30)
This issue is the fifth official release.
Modifies the applicable product versions in the replacing quorum server procedure.
Issue 04 (2017-11-30)
This issue is the fourth official release.
Optimized the description in the documentation.
Issue 03 (2017-08-30)
This issue is the third official release.
Rectified some description of replacing a controller.
Issue 02 (2017-06-01)
This issue is the second official release.
Added the procedure for removing/inserting the power cables.
Issue 01 (2017-02-28)
This issue is the first official release.
