Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a Fan Module
This section describes how to install a fan module.
Prerequisite
- You have removed the chassis cover from the SVP. For details, see Removing the Chassis Cover.
- You have located the position of the fan module to be replaced in the SVP.
- You have obtained the rack number and chassis number of the SVP.
- You have located the SVP based on the preceding information, and labeled its panel to prevent misoperations.
Tools and Materials
- ESD gloves or ESD wrist strap
- Packaging materials, for example, an ESD bag
Procedure
- Take the spare part out of the ESD bag.
- Insert the fan module along the guide rails into the slot. Check that the fan cable connector is securely inserted into the mainboard connector. See step (1) in Figure 5-76.
- Close the handle for the fan module. See step (2) in Figure 5-76.
