Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing the Parts of a Quorum Server
This chapter describes how to replace the parts in a quorum server.
Table 5-1 lists the parts that can be replaced in a Huawei quorum server.
Table 5-1 Parts that can be replaced in a Huawei quorum server
Part |
Active-Active Service Affected or Not |
|---|---|
Entire quorum server |
If you power off the quorum server, the arbitration mode of the active-active service changes to the static priority mode. The reliability of the active-active service decreases. |
Disk module |
|
Power module |
2280 balanced model (2280 for short) of the TaiShan 200 server, 1288H V5, and RH1288 V3 can be used as quorum servers. If you want to replace a component such as a VGA board, indicator board, or disk backplane in a quorum server, see Removal and Installation in the Maintenance and Service Guide specific to your product.
