Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
40GE Interface Module
The 40GE interface module is used to connect storage devices to application servers.
Function
A 40GE interface module provides two 40 Gbit/s optical ports.
The storage system does not support optical modules purchased by the customer elsewhere. Use optical modules that match the storage interface modules.
Ports
Figure 4-121 shows the appearance of a 40GE interface module. FE stands for front-end.
Indicator
Table 4-48 describes the indicators on a 40GE interface module after the storage system is powered on.
Table 4-48 Indicators on a 40GE interface module
Indicator |
Status and Description |
|---|---|
Module Power indicator |
|
Port Speed indicator |
|