The 25 Gbit/s RDMA interface module is used to connect two controller enclosures.
Function
A 25 Gbit/s RDMA interface module provides four 25 Gbit/s optical ports.
Ports
Figure 4-120 shows the appearance of a 25 Gbit/s RDMA interface module. SO stands for scale-out.
Figure 4-120 25 Gbit/s RDMA interface module![]()
Indicator
Table 4-47 describes the indicators on a 25 Gbit/s RDMA interface module after the storage system is powered on.
Table 4-47 Indicators on a 25 Gbit/s RDMA interface moduleIndicator
|
Status and Description
|
Module Power indicator
|
- Steady green: The interface module is working correctly.
- Blinking green: There is a hot swap request to the module.
- Steady yellow: The module is faulty.
- Off: The module is powered off or hot swappable.
|
Port Speed indicator
|
- Steady green: The speed is the highest.
- Blinking green (2 Hz): The port is transmitting data at the highest speed.
- Steady yellow: The optical module or cable is faulty or not supported by the port.
- Blinking yellow (2 Hz): The problem is being located.
- Off: The port is not connected.
|