Overview

Overall Structure

Figure 4-200 shows the overall structure of a high-density disk enclosure.

Figure 4-200 Overall structure of a high-density disk enclosure

Front View

Figure 4-201 shows the front view of a high-density disk enclosure.

Figure 4-201 Front view of a high-density disk enclosure

Rear View

Figure 4-202 shows the rear view of a high-density disk enclosure.

Figure 4-202 Rear view of a high-density disk enclosure

Only serial cables can be inserted into the serial ports. Do not insert network cables into the serial ports.

Top View

Figure 4-203 shows the top view of a high-density disk enclosure.

Figure 4-203 Top view of a high-density disk enclosure

The disk number of a high-density disk enclosure displayed on DeviceManager or CLI ranges from 0 to 74. These disks are numbered from left to right (15 columns) and from bottom to top (five rows). The slots of a high-density disk enclosure are numbered 0 to 14 from left to right (15 columns), and A to E from bottom to top (five rows). For example, in the preceding figure, the disk in the red box is numbered 40 in slot C10.

Table 4-83 lists the mappings between disk numbers and slot numbers of high-density disk enclosures.

Hardware Specifications

Table 4-84 lists the dimensions and weight specifications of the disk enclosure. For more specifications, refer to Specifications query (https://support-it.huawei.com/spec/#/home).