Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing PSUs on a Support in a 19-inch Cabinet
Procedure
- Place two PSUs on the support in a 19-inch cabinet, and align the PSUs with the screw holes on the support.
The support needs to be purchased separately.
- Tighten the M4 screws to secure the PSUs to the support.
- Place the support on the 19-inch cabinet, and then tighten the M6 screws on the panel to secure the support to the 19-inch cabinet.
