Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Atlas 500 AI edge station on a Workbench
Ensure that the workbench is stable and properly grounded.
Leave at least 100 mm of space around the Atlas 500 AI edge station for heat dissipation.
Do not put other items on the Atlas 500 AI edge station.
- Do not place cups containing liquid close to or on the device. Liquid poses safety risks. If foreign matter or liquid enters the device, stop using the device immediately, disconnect the power supply, remove all cables from the device, and contact after-sales personnel.
Installing an Atlas 500 AI edge station (Without Drive)
Procedure
- Place the Atlas 500 AI edge station on the workbench.
When installing the Atlas 500 AI edge station on a workbench, attach a foot pad to the bottom, as shown in the following figure.
- Connect external cables.
For details, see Connecting External Cables.
- Power on the Atlas 500 AI edge station.
For details, see Power-On Procedure.
Installing an Atlas 500 AI edge station (with Drive)
Procedure
- Place the Atlas 500 AI edge station on the workbench.
When installing the Atlas 500 AI edge station on a workbench, attach a foot pad to the bottom, as shown in the following figure.
- Connect external cables.
For details, see Connecting External Cables.
- Power on the Atlas 500 AI edge station.
For details, see Power-On Procedure.
