Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Power-Off Procedure
The Atlas 500 AI edge station supports the following power-off modes:
- Before powering off the device, ensure that all services and programs have been stopped or transferred.
- Do not power off the device by removing the power cable. Otherwise, data may be lost or system exceptions may occur.
Gracefully Powering Off the Atlas 500 AI edge station
- Firmly press the power button on the front panel.
If the power indicator is blinking green, the Atlas 500 AI edge station is being powered off.
- When the power indicator is off, the health indicator is blinking red. This indicates that the Atlas 500 AI edge station is powered off.
Figure 5-25 shows the position of the power indicator.
Figure 5-26 shows the position of the health indicator.
If the health indicator is blinking red, the server is running properly.
- Remove the power cable.
Forcibly Powering Off the Atlas 500 AI edge station
- Press and hold the power button on the front panel for more than 5 seconds, and then release the button.
If the power indicator is off and the health indicator is blinking red, the Atlas 500 AI edge station is forcibly powered off.
Figure 5-27 shows the position of the health indicator.
If the health indicator is blinking red, the server is running properly.
- Remove the power cable.
