Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting an Ethernet Cable
Context
Do not power on the edge device before you finish connecting cables.
When connecting cables, notice interface identifiers to ensure correct cable connections. Incorrect cable connections may cause damage to the interface module or the router.
Procedure
- Wear an ESD wrist strap.
For details, see ESD Protection.
- Connect one end of an Ethernet cable to an Ethernet interface of the router and the other end to an Ethernet interface of the remote device.
Shielded cables are recommended.
Figure 5-15 Connecting an Ethernet cable
