No relevant resource is found in the selected language.
MENU
Support Documentation
Atlas 500 AI Edge Station User Guide (Models 3000, 3010) 08
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Indicators and Buttons on the Front Panel

Indicators and Buttons on the Front Panel

Positions

Figure 2-1 Indicators and buttons on the front panel

1

Power indicator/button

2

Bluetooth indicator/button (reserved)

3

Drive indicator

4

Health indicator

5

Reset button

-

-

Indicator and Button Description

Table 2-1 Description of the indicators and buttons on the front panel

Indicator/Button

Description

Power indicator/button

Power indicator:

  • Steady green: The device is operating properly.
  • Blinking green: The device is being powered off.
  • Off: The device is powered off.
Power button description
  • If you press this button when the system is powered on, the system starts the graceful power-off process.
  • If you hold down this button for 5 seconds when the system is powered on, the system starts the forcible power-off process.
  • If you press this button when the system is powered off, the system starts the power-on process.

Bluetooth indicator/button

NOTE:

The Bluetooth indicator/button is reserved and currently unavailable.

Bluetooth indicator:

  • Steady blue: The Bluetooth function is enabled.
  • Off: The Bluetooth function is disabled.

Bluetooth button:

You can press this button to enable the Bluetooth function.

Drive indicator
  • Steady green: The drive is operating properly.
  • Blinking green: Data is being read from or written to the drive.
  • Off: No drive is installed or the drive is not started.
NOTE:

If HDDs are configured, the indicator blinks green even though no data is being transmitted. This is a normal phenomenon, indicating that the system is reading the temperature and health status of HDDs.

Health indicator
  • If the power indicator is steady green and the health indicator is steady green, the server is running properly.
  • If the power indicator is steady green and the health indicator is blinking red at 1 Hz, a major alarm has been generated.
  • If the power indicator is steady green and the health indicator is blinking red at 5 Hz, a critical alarm is generated.
  • If the power indicator is steady green and the health indicator is off, the server is not powered on.
  • If the power indicator is off and the health indicator is blinking red, the system is powered off successfully.
  • If the health indicator is blinking orange at 0.5 Hz, the device is in the low-temperature startup phase.

Reset button

You can press this button to reset the system.
Translation
简体中文
Download
Updated: 2020-12-25

Document ID: EDOC1100133162

Views: 13479

Downloads: 281

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :