Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALM-0x000E0006 NPU SP Pointer Fault (NPU, Major Alarm)
Description
Alarm message:
The NPU SP pointer is incorrect.
This alarm is generated when the NPU triggers an SP alignment error. This alarm is cleared when the error is rectified.
Alarm object:
NPU
Attributes
Alarm ID |
Alarm Severity |
Auto Clear |
|---|---|---|
0x000E0006 |
Major |
Yes |
Impact on the System
The TS cannot work properly.
Possible Causes
- Component initialization fails.
- The address is out of bound.
Procedure
- Restart the Atlas 500 AI edge station and check whether the alarm is cleared.
- If yes, no further action is required.
- If no, go to 2.
- Contact Huawei technical support.