Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Application Mode for the Atlas 200 AI accelerator module
During the development of the Atlas 200 AI accelerator module printed circuit board (PCB), you can set the Atlas 200 AI accelerator module application mode by setting the values of the BOOT_MD[2:0] general-purpose input/output (GPIO) pins. Software development personnel can obtain the Atlas 200 AI accelerator module application mode by checking the values of the BOOT_MD[2:0] GPIO pins of the Atlas 200 AI accelerator module. For details, see the Atlas 200 Hardware Development Guide (Model 3000).
Table 4-1 Atlas 200 AI accelerator module boot mode settings
Application Mode |
BOOT_MD[2:0] |
Description |
|---|---|---|
Main processor |
010 |
On-chip ROM+SFC (SPI NOR) |
Coprocessor |
010 |
On-chip ROM+SFC (SPI NOR) |
PCIe slave device |
000 |
On-chip ROM+SFC (xloader)+PCIe (EP mode only) |