Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Process
This section describes how to configure HyperReplication. You can set up a pair relationship between the primary resource and secondary resource to implement data synchronization.
Figure 3-1 shows the process for configuring HyperReplication.
Unless otherwise specified, the preceding operations can be performed on either the primary or the secondary storage device. If you want to perform the operations on the secondary storage device, perform a primary/secondary switchover first.
Configure SAN services on DeviceManager. For details on how to log in to DeviceManager, see Logging In to DeviceManager in the Basic Storage Service Configuration Guide for Block specific to your product model.