Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reconnecting the Remote Device
This operation enables you to reconnect remote devices.
Procedure
- Choose Data Protection > Configuration > Remote Devices.
- Click
in the upper right corner of a remote device and choose Reconnect.
The Reconnect Remote Device page is displayed on the right.
- Set the user name and password for the Fibre Channel link. Table 7-2 describes the parameters.
- Click Connect.
- Click OK.
in the upper right corner of a remote device and choose Reconnect.
