Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing a Remote Replication CG
HyperReplication copies data from a local storage device to a remote storage device for remote DR.
- Viewing a Remote Replication CG
This section describes how to view information about a remote replication CG to manage the CG. - Modifying a Remote Replication CG
This section describes how to modify the name and description of a remote replication CG. - Synchronizing a Remote Replication CG
This section describes how to synchronize all remote replication pairs in a CG. After the synchronization, the primary LUN data and secondary LUN data in each remote replication pair are consistent at the synchronization time point, ensuring data validity. - Splitting a Remote Replication CG
This section describes how to split all remote replication pairs in a CG at the same time. A complete point-in-time duplicate is generated for the secondary LUNs of the remote replication pairs, and can be used for report generation, testing, data mining, decision-making, and data recovery. - Performing a Primary/Secondary Switchover for a Remote Replication CG
This section describes how to switch the roles of primary and secondary LUNs of all the remote replication pairs in a remote replication CG. If the primary LUN in the remote replication CG is faulty, you can perform a primary/secondary switchover. This operation enables the secondary LUN to become new primary LUN, replacing the faulty primary LUN to ensure service data continuity. - Enabling Protection for the Secondary Resource in a Remote Replication CG
This section describes how to enable protection for the secondary resources of all remote replication pairs in a CG. After this operation, data cannot be written to secondary resources, ensuring secondary resource data security. - Disabling Protection for the Secondary Resource in a Remote Replication CG
This section describes how to disable protection for the secondary resources of all remote replication pairs in a CG. After this operation, data can be written to secondary resources. - Deleting a Remote Replication CG
This section describes how to delete a remote replication CG that is no longer needed.