Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
FAQs
This chapter provides answers to frequently asked questions (FAQs) about HyperReplication. If you encounter problems during configuration or maintenance, you can read this chapter to see whether your problems can be solved. If your problems persist or you cannot find answers, contact Huawei technical support.
- How Can I Use the Secondary LUN in a Remote Replication Pair?
- Why Information About the Primary Device and Secondary Device in a Remote Replication Relationship Cannot Be Updated in Real Time?
- How Can I Set the Bandwidth for Remote Replication to Achieve the Optimal Performance?
- What Are the Precautions for Creating a Remote Link?
- What Is the Impact After the Properties of a Consistency Group Are Modified?
- Is Initial Synchronization Required to Synchronize Data from the Primary Storage System to the Secondary Storage System When a Remote Replication Pair Is Created?
- Do I Need to Stop the Services on the Primary Storage System before Performing Initial Synchronization?
- What Is the Impact of the Secondary Storage System Failure on Remote Replication?
- Why Is the Secondary LUN Not Displayed When a Remote Replication Pair Is Created?