Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Link
This operation enables you to add remote links for redundancy.
Prerequisites
A remote device has been added to the storage system, and links can be added to the remote device.
For details about the number of ports that can be used for replication on a controller, visit Specifications Query.
Procedure
- Choose Data Protection > Configuration > Remote Devices.
- Click
in the upper right corner of a remote device and choose Add Link.
The Add Link page is displayed on the right.
Alternatively, click the name of the desired remote device. In the upper right corner of the page that is displayed, select Add Link from the Operation drop-down list.
- Select the ports to which you want to add links.
Select Include the ports that are link down.
- Click OK.
in the upper right corner of a remote device and choose Add Link.
