License Requirements and Compatible Products
This section describes the license requirements, compatible products, and specifications of HyperReplication.
License Requirements
HyperReplication is a value-added feature that requires a software license in both the primary and secondary storage systems.
For details about the license, see Software Specifications in the Product Description specific to your product model and version. To obtain the license, contact your local Huawei representative office or Huawei authorized distributor.
You can log in to Huawei's technical support website (https://support.huawei.com/enterprise/) and enter the product model + document name in the search box to search for, browse, and download the desired documents.
Compatible Hardware
Table 1-2 and Table 1-3 list primary and secondary storage systems compatible with HyperReplication.
Hardware |
Model |
Version |
|---|---|---|
OceanStor Dorado V6 series |
Dorado 3000 V6 |
6.0.1 |
Dorado 5000 V6 |
||
Dorado 6000 V6 |
||
Dorado 8000 V6 |
||
Dorado 18000 V6 |
If the primary storage system is Dorado 5000 V6, Dorado 6000 V6, Dorado 8000 V6, or Dorado 18000 V6, you are advised not to use Dorado 3000 V6 as the secondary storage system to avoid performance bottlenecks.
Hardware |
Model |
Version |
|---|---|---|
OceanStor Dorado V6 series |
Dorado 3000 V6 |
6.0.0 and later versions |
Dorado 5000 V6 |
||
Dorado 6000 V6 |
||
Dorado 8000 V6 |
||
Dorado 18000 V6 |
This table lists only the models and versions of secondary systems supported by the current version of this feature. The secondary storage system information may be updated for later versions of this feature. For details, see Huawei Storage Interoperability Navigator. The method is as follows:
- Click
to select a storage model.
- In Other Feature/Component, select HyperReplication (for Block) and click Add.
- Click
next to HyperReplication (for Block). Then select the remote storage system to which you want to connect and click OK.
- Click Submit to view the result.
to select a storage model.
next to HyperReplication (for Block). Then select the remote storage system to which you want to connect and click OK.Compatible Software
Software |
Version |
|---|---|
OceanStor BCManager eReplicationa |
For details, see the Version Mapping specific to your product model. |
a: To obtain the software installation package, log in to https://support.huawei.com/enterprise/. In the search field, enter OceanStor BCManager, and select a path from the paths that are automatically displayed to go to the document page. Then click the Software Download tab, and search and download your desired software. NOTE:
For asynchronous remote replication, you are advised to use the BCManager eReplication DR software if the synchronization period is longer than 15 minutes. Because a host's cached data may not be completely delivered to the local storage system when a periodic synchronization period is reached, data synchronized to the remote storage system may be inconsistent with that in the local storage system. BCManager eReplication can cooperate with hosts to ensure data consistency between local and remote storage systems. For details about BCManager eReplication, see the User Guide and Compatibility List specific to your product model and version. |
|
Specifications
The HyperReplication specifications vary according to the product models. For details, see the Product Description specific to your product model and version.
