Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
The Storage System Does Not Detect the Initiators Provided by an HP-UX Server
Symptom
After an HP-UX server is connected to the storage system using Fibre Channel links, its initiators cannot be detected by the storage system.
Possible Causes
If no LUNs are mapped to an HP-UX server, the HP-UX server does not connect to the storage system.
Procedure
- Log in to the storage system and create initiators for the HP-UX server.
- Remap LUNs to the HP-UX server.
- Remove and reinsert the links and check whether the fault is rectified.
- If yes, no further action is required.
- If no, keep the fault environment intact and contact Huawei technical support.
