Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Component Description
Appearance
Figure 2-5 Appearance
![]()
(1) LED indicators |
(2) Front panel |
(3) Hanging kit |
(4) Mounting bracket |
(5) Heat sink |
(6) Ventilation valve |
(7) DC switch locking screw holea |
(8) DC switchb (DC SWITCH) |
(9) DC input terminals (PV1+/PV1–) |
(10) DC input terminals (PV2+/PV2–) |
(11) Battery terminals (BAT+/BAT–) |
(12) Smart Dongle port (4G/FE) |
(13) Antenna port (ANT) |
(14) Communications port (COM) |
(15) AC output port (AC) |
(16) Ground point |
- Note a: The DC switch locking screw is used to lock the DC switch to prevent accidental startup. It is delivered with the SUN2000.
- Note b: DC input terminals PV1 and PV2 are controlled by the DC switch.
