Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparing Tools and Instruments
Type |
Tools and Instruments |
||
|---|---|---|---|
Installation |
Hammer drill (with a drill bit of 8 mm) |
Torque socket wrench |
Torque wrench |
Diagonal pliers |
Wire strippers |
Torque screwdriver |
|
Rubber mallet |
Utility knife |
Cable cutter |
|
Crimping tool (model: PV-CZM-22100/19100) |
Cord end terminal crimper |
Disassembly and Assembly Tool (model: PV-MS-HZ open-end wrench) |
|
Cable tie |
Vacuum cleaner |
Multimeter (DC voltage measurement range ≥ 600 V DC) |
|
Marker |
Steel measuring tape |
Level |
|
Hydraulic pliers |
Heat-shrink tubing |
Heat gun |
|
Personal protective equipment (PPE) |
Safety gloves |
Safety goggles |
Dust mask |
Safety boots |
- |
- |
|
