About This Document
Purpose
- Functions and features of the iBMC
- iBMC web user interface (WebUI)
- iBMC command line interface (CLI)
- Commands used on the iBMC
This document describes only the commands used to deploy and maintain Huawei servers. It does not include the following commands:
- Commands for server manufacturing, assembling, and factory inspection and repair.
- Commands for engineering implementation or fault locating.
Inappropriate use of these commands may result in device faults or service interruption. To obtain information about these commands, contact Huawei technical support.
This document applies to: Atlas 800 AI training servers, including 9000.
Intended Audience
This document is intended for:
- Server installation engineers
- Server maintenance engineers
The person who installs, manages, and troubleshoots servers must be qualified in servicing servers and trained in recognizing hazards in products with hazardous energy levels.
Symbol Conventions
The following table lists the symbols that may be found in this document.
Symbol |
Description |
---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Issue |
Date |
Description |
---|---|---|
07 |
2022-04-09 |
Updated Home. |
06 |
2021-07-05 |
Updated Setting the Fan Speed (fanlevel). |
05 |
2021-04-21 |
Updated iBMC SmartServer Mobile and Server Commands. |
04 |
2021-02-05 |
Updated Obtioning the IP Address of the Management Network Port. |
03 |
2020-11-15 |
Updated System Overview, Login Precautions and One-Click Information Collection. |
02 |
2020-08-13 |
Updated About This Document. |
01 |
2020-04-28 |
This issue is the first official release. |