Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Configuration Information of All Syslog Reporting Channels (syslog -d iteminfo)
Function
The syslog -d iteminfo command is used to query configuration information of the four syslog reporting channels.
Format
ipmcget -t syslog -d iteminfo
Parameters
None
Usage Guidelines
None
Example
# Query configuration information of iBMC syslog reporting channels.
iBMC:/-> ipmcget -t syslog -d iteminfo
Item Num | state | port | dest address | log type
1 | disabled | 65535 | host | operationlogs securitylogs eventlogs
2 | disabled | 0 | | operationlogs securitylogs eventlogs
3 | disabled | 0 | | operationlogs securitylogs eventlogs
4 | disabled | 0 | | operationlogs eventlogs