Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the PSU Work Mode (psuworkmode)
Function
The psuworkmode command is used to set the PSU work mode.
Format
ipmcset -d psuworkmode -v <option> [active_psuid]
Parameters
Parameter |
Description |
Value |
|---|---|---|
option |
Specifies the PSU work mode. |
|
active_psuid |
Specifies the ID of the active PSU when the PSUs are working in active/standby mode. |
1 or 2 |
Usage Guidelines
None
Example
# Set the PSU work mode.
iBMC:/->ipmcset -d psuworkmode -v 1 1
Set Power Work Mode (Active Standby) successfully
