Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying iBMC IP Information (ipinfo)
Function
The ipinfo command is used to query the IP address of the iBMC management network port.
Format
ipmcget -d ipinfo
Parameters
None
Usage Guidelines
None
Example
# Query the iBMC IP address.
iBMC:/->ipmcget -d ipinfo EthGroup ID : 1 Net Mode : Adaptive Net Type : Dedicated IPv4 Information : IP Mode : static IP Address : 192.168.3.140 Subnet Mask : 255.255.0.0 Default Gateway : 192.168.0.1 Backup IP Address : 192.168.0.33 (Deactivated) Backup Subnet Mask : 255.255.0.0 (Deactivated) MAC Address : IPv6 Information : IPv6 Mode : static IPv6 Address 1 : fc00:225::3140/64 Default Gateway IPv6 : fc00:225::1 Link-Local Address : fe80::1a3d:5eff:febe:bc35/64 IPv6 Address 2 : fc00:225::1a3d:5eff:febe:bc35/64 VLAN Information : VLAN State : disabled
In the values of Backup IP Address and Backup Subnet Mask, Activated indicates that the IP address and subnet mask are activated, and Deactivated indicates that the IP address and subnet mask are not activated.