Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the SNMP Trap Community Name (trap -d community)
Function
The trap -d community command is used to set the SNMP trap community name.
Format
ipmcset -t trap -d community
Parameters
Parameter |
Description |
Value |
|---|---|---|
Community |
Specifies the SNMP trap community string. |
Default value: TrapAdmin12#$ The value range varies depending on whether password complexity check is enabled.
|
Usage Guidelines
None
Example
# Set the SNMP trap community name to mytrap.
iBMC:/->ipmcset -t trap -d community
New Community:
Confirm Community:
Set SNMP trap community successfully.
