Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a User (deluser)
Function
The deluser command is used to delete a user.
Format
ipmcset [-t user] -d deluser -v username
Parameters
Parameter |
Description |
Value |
|---|---|---|
username |
Specifies the user to be deleted. |
- |
Usage Guidelines
- Only administrators can delete users, and the administrator's password is required.
- If there is only one administrator enabled in the iBMC system, the administrator cannot be deleted.
Example
# Delete user test.
iBMC:/->ipmcset -d deluser -v test Input your password: Delete user successfully.
