Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the LDP Running Status
Context
In routine maintenance, you can run the following commands in any view to view the LDP running status.
Procedure
- Run the display mpls ldp error packet { tcp [ peer peer-id ] | udp [ interface interface-type interface-num ] } command to check statistics on LDP error messages.
- Run the display mpls ldp event adjacency-down [ interface interface-type interface-number | remote ] [ peer peer-id ] [ verbose ] command to check information about LDP adjacencies in Down state.
- Run the display mpls ldp event session-down [ peer-id ] [ verbose ] command to check information about LDP sessions in Down state.
