Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP LSP Alternates Between Up and Down States
Procedure
- Check whether the LDP session flaps.
Run the display mpls ldp session command to check the displayed Status field. You are advised to run this command once every 1s. If the LDP session status switches between Operational and non-operational, the LDP session flap occurs.
If the LDP session flap occurs, rectify the fault by referring to LDP Session Alternates Between Up and Down States.
