Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing to the MSTP Mode
Context
If an interface on an MSTP-enabled device is connected to an STP-enabled device, the interface changes to the STP-compatible mode.
If the STP-enabled device is changed to MSTP mode, or if it is powered off or disconnected from the MSTP-enabled device, the interface will not automatically change to MSTP mode. In this case, use the stp mcheck command to configure the interface to change to the MSTP mode.
