Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling MSTP
Context
After MSTP multi-process is enabled on the switching device, you must enable MSTP in the MSTP process view so that the MSTP configuration can take effect in the MSTP process.
Enabling MSTP immediately triggers spanning tree calculation on the network. Therefore, before enabling MSTP, perform basic configurations on switching devices to avoid network flapping, which may occur upon changes to parameters such as device priority and interface priority.