Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Summary of ERPS Configuration Tasks
After a single ERPS ring or intersecting ERPS ring is configured, a specified port can be blocked to remove loops. Table 12-5 describes the ERPS configuration tasks.
Table 12-5 ERPS configuration tasks
Scenario |
Description |
Task |
|---|---|---|
Configure ERPS single-ring networking |
You can configure ERPS single-ring networking when there is only one ring in the network topology. |
|
Configure ERPS intersecting-ring networking |
You can configure ERPS intersecting-ring networking when there are two or more rings in the network topology and many common nodes between two rings. |
