Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the VLAN Aggregation Configuration
Procedure
- Run the display vlan [ vlan-id [ verbose ] ] or display vlan [ vlan-id1 [ to vlan-id2 ] | vlan-name vlan-name | summary ] command to check VLAN information.
- Run the display interface vlanif [ vlan-id ] command to check information about a specific VLANIF interface.
- Run the display sub-vlan [ vlan-id ] command to check mappings between sub-VLANs and super-VLANs.
- Run the display super-vlan [ vlan-id ] command to check sub-VLANs contained in a super-VLAN.