Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the GVRP Configuration
Procedure
- Run the display gvrp status command to check the status of global GVRP.
- Run the display gvrp statistics [ interface interface-type interface-number ] command to check GVRP statistics on an interface.
- Run the display garp timer [ interface interface-type interface-number ] command to check values of GARP timers.
- Run the display garp statistics [ interface interface-type interface-number ] command to check GARP statistics on an interface.
- Run the display gvrp state interface interface-type interface-number vlan vlan-id command to check GVRP state machine.
- Run the display gvrp vlan-operation interface interface-type interface-number command to check information about dynamic VLANs on the specified interface.