No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
CloudEngine 12800 and 12800E V200R019C10 Configuration Guide - Ethernet Switching
This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, M-LAG, VLAN, QinQ, VLAN mapping, GVRP, STP/RSTP, MSTP, VBST, ERPS (G.8032), LBDT, and Layer 2 protocol transparent transmission.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Statistics
Clearing Statistics
Context
Statistics cannot be restored once being cleared.
Procedure
Run the reset lacp statistics eth-trunk [ trunk-id [ interface interface-type interface-number ] ] command to clear statistics on transmitted and received LACP packets.
Run the reset port forwarding-pathpath-idpathnumstatistics command to clear statistics on the packets that contain the specified 5-tuple information.