(Optional) Setting the LACP System Priority
Context
LACP system priorities determine the sequence in which devices at two ends of an Eth-Trunk select active interfaces to join a LAG. In order for a LAG to be established, both devices must select the same interfaces as active interfaces. To achieve this, one device (with a higher priority) is responsible for selecting the active interfaces. The other device (with a lower priority) then selects the same interfaces as active interfaces.
Procedure
- Run system-view
The system view is displayed.
- Run lacp priority priority
The LACP system priority is set.
In priority comparisons, numerically lower values have higher priority. By default, the LACP system priority is 32768.
The end with a smaller priority value functions as the Actor. If the two ends have the same priority, the end with a smaller MAC address functions as the Actor.
- Run commit
The configuration is committed.