Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Link Aggregation in Manual Load Balancing Mode
- (Optional) Setting the Number of LAGs
- Creating a LAG
- Setting the Link Aggregation Mode to Manual Load Balancing
- Adding Member Interfaces to an Eth-Trunk
- (Optional) Setting the Lower Threshold for the Number of Active Interfaces
- (Optional) Configuring the Weight of Load Balancing for a Member Interface
- (Optional) Configuring a Load Balancing Mode (CE12800)
- (Optional) Configuring a Load Balancing Mode (CE12800E)
- (Optional) Configuring an Eth-Trunk Load Balancing Mode for PPPoE Packets
- Verifying the Link Aggregation Configuration