Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Hash Mode of the VLAN-XLATE Table
When a hash conflict in the VLAN-XLATE table occurs, run the assign forward vlan-xlate command to change the uplink and downlink hash modes of the VLAN-XLATE table to reduce hash conflicts.
Context
After a hash mode of the VLAN-XLATE table is configured, you must restart the device to make the configuration take effect.
Only the CE12800E that has the FD-X series cards installed supports this function.
Procedure
- Run system-view
The system view is displayed.
- Run assign forward vlan-xlate { egress | ingress } hash { crc16-lower | crc16-upper | crc32-lower | crc32-upper | lsb }
A hash mode of the VLAN-XLATE table is configured.
By default, the uplink and downlink hash modes of the VLAN-XLATE table are both crc32-lower.
- Run commit
The configuration is committed.