Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting VBST Parameters That Affect VBST Convergence
After basic VBST functions are configured, VBST implements fast convergence using default parameters. To achieve better convergence, set parameters that affect VBST convergence.
- Setting the Network Diameter
- Setting Values of VBST Timers
- Setting the VBST Timeout Interval
- Setting the Link Type of a Port
- Setting the Maximum Transmission Rate of a Port
- Configuring a Port as an Edge Port and BPDU Filter Port
- Setting the Maximum Number of Hops of VBST
- Verifying the Configuration of VBST Parameters That Affect VBST Convergence