Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting MAC Address Entries
Table 2-9 Commands used to delete MAC address entries
Action |
Command |
|---|---|
Delete dynamically learned MAC address entries. |
reset mac-address
NOTE:
For FD, FDA, FG, FD1, FG1, SD series cards and ED-E, EG-E, and EGA-E series cards, when the reset mac-address command is used to clear MAC addresses of the VS in port mode, ignore the broadcast traffic that occur instantly. |
Delete all static and blackhole MAC address entries. |
undo mac-address all |
Delete static and blackhole MAC address entries in a VLAN. |
undo mac-address vlan vlan-id |
Delete static and blackhole MAC address entries on an interface. |
undo mac-address interface-type interface-number |