Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Group VLAN for a Subordinate VLAN
Context
A VLAN associated with a group port is called a group VLAN. Group ports in a group VLAN can communicate with each other.
Procedure
- Run system-view
The system view is displayed.
- Run vlan vlan-id
The view of a created principal VLAN is displayed.
- Run subordinate group { vlan-id1 [ to vlan-id2 ] } &<1-10>
A group VLAN is configured for the subordinate VLAN.
A maximum of 128 group VLANs can be configured for a principal VLAN.
The VLAN ID assigned to a group VLAN can no longer be used to configure the VLANIF interface, Super-VLAN, Sub-VLAN, VLAN Mapping, VLAN Stacking.
- Run commit
The configuration is committed.