Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for Link Aggregation
This section only provides configuration examples for individual features. For details about multi-feature configuration examples, feature-specific configuration examples, interoperation examples, protocol or hardware replacement examples, and industry application examples, see the Typical Configuration Examples.
- Example for Configuring Link Aggregation in Manual Load Balancing Mode
- Example for Configuring Link Aggregation in LACP Mode
- Example for Configuring an Eth-Trunk to Work in Dynamic LACP Mode
- Example for Configuring an Inter-Chassis Eth-Trunk to Preferentially Forward Traffic Through Local Member Interfaces
- Example for Configuring Eth-Trunk Load Balancing
- Example for Configuring Inter-device Link Aggregation in LACP Mode (Standalone Device)