No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
CloudEngine 12800 and 12800E V200R019C10 Configuration Guide - Ethernet Switching
This document describes the configuration of Ethernet services, including configuring MAC address table, link aggregation, M-LAG, VLAN, QinQ, VLAN mapping, GVRP, STP/RSTP, MSTP, VBST, ERPS (G.8032), LBDT, and Layer 2 protocol transparent transmission.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Assigning an IP Address to the VLANIF Interface of a Super-VLAN
Assigning an IP Address to the VLANIF Interface of a Super-VLAN
Context
The IP address of the VLANIF interface of a super-VLAN must contain the subnet segments where users in sub-VLANs reside. All the sub-VLANs use the IP address of the VLANIF interface of the super-VLAN, saving IP addresses.
Procedure
Run system-view
The system view is displayed.
Run interface vlanifvlan-id
A VLANIF interface is created for a super-VLAN, and the view of the VLANIF interface is displayed.
Run ip addressip-address { mask | mask-length } [ sub ]
An IP address is assigned to the VLANIF interface.